Download:
AeroShell - Turbine Oil 560 TDSAeroShell - Turbine Oil 560 SDS ENAeroShell - Turbine Oil 560 SDS CROAeroShell Turbine Oil 560 is a third generation, high performance, low coking 5 mm2/s synthetic hindered ester oil incorporating a carefully selected and finely balanced combination of additives to improve thermal
and oxidation stability.
APPLICATIONS
Changes which have taken place over the last twenty years in engine performance (in terms of improved fuel consumption, higher operating temperatures and pressures) and maintenance practices have resulted in increased severity in lubricant operating conditions.
AeroShell Turbine Oil 560 was developed to withstand the hostile environments of today’s high powered, high compression engines in which the older generation of oils can be stressed up to and beyond their thermal limits, as evidenced by oil coking in the high temperature bearing areas.
By overcoming the problems associated with using old technology oils in new technology engines, AeroShell Turbine Oil 560:
* maintains a cleaner engine
* provides improved load carrying capacity
* reduces maintenance costs
* prolongs bearing life
in both new and existing engines.
In order for military authorities to take advantage of this better performance in military engines the specification MIL-PRF-23699 was e-written to include a "High Thermal Stability" HTS) grade as well as the Standard (STD) and Corrosion Inhibited (C/I) grades.
AeroShell Turbine Oil 560 is fully approved as an HTS oil.
With effect from January 1st 2002, AeroShell Turbine Oil 560 has been manufactured with an improved formulation to further enhance its
anti-coking performance.
AeroShell Turbine Oil 560 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics. Refer to the General Notes at the front of this section for further information.
SPECIFICATIONS
U.S. - Approved MIL - PRF -23699G Grade HTS
British - Equivalent DEF STAN 91-101 Grade OX-27
French - Equivalent DCSEA 299/A
Russian - Analogue to VNII NP 50-1-4F, B3V,
LZ-240, VNII NP 50-1- 4U and 36/Ku-A
NATO Code - O-154
Joint Service Designation - Equivalent OX-27
Pratt & Whitney Approved - 521C Type II
General Electric Approved - D-50 TF1
Allison - Approved EMS-53 (Obsolete)
EQUIPMENT MANUFACTURER’S APPROVALS
AeroShell Turbine Oil 560 is approved for use in all models of the following engines:
Honeywell - TFE 731, TPE 331, APUs (majority of models), LTS 101, LTP 101, ALF 502,
LF 507, AS907, AS977
Allison (Rolls-Royce) - 250 Series
BMW/Rolls-Royce - BR710, BR715
CFM International - CFM-56 (all models)
CFE - CFE 738
GE - GE 90, CF6 (all models), CJ610, CF700, CT58, CF34
IAE - V2500 Series
IHI - FJR 710
Pratt & Whitney - JT3D, JT8D, JT9D, PW4000 Series (cleared for flight evaluation in PW2000 engines)
Pratt & Whitney - PT6T, PT6A (some models only), PW100 Canada Series, JT15D, PW200 Series, PW300 Series, PW500 Series, PW901A APU
Rolls-Royce - RB211-22B, -524, -535, Spey, Tay, RB183, Adour
Turbomeca - Arriel, Makila, RTM 322, TM 319, TM 333, TP 319, various models of Astazou and Artouste engines