KIT FEATURES
The above dash HUD caters to pilots that don’t have room under the glare-shield. The display and switch panel are inside the dome that sits on top of the glare-shield. Intended for placement directly in front of the pilot. Allows for instantaneous viewing of AOA information exactly where needed.

The Above Dash HUD kit sits on top of the Eagle display, showing the display segments in the HUD glass. The Eagle Above Dash HUD kit comes complete with interface computer, prewired cable/connector harnesses, tubing, cut to fit AOA probe mounting plate, hardware, switch panel, and flush mount HUD mounting brackets for installation in any aircraft. Our systems are designed for simple installation and pilot flown calibration for real time, instantaneous full-scale AOA range.

The Eagle display is a highly visible, full color, chevron style display. With the chevron display, when you come in for a landing you want to fly to the blue donut (on speed for landing). Should you come in with too low of an angle of attack, the yellow chevron will light up and tell you to put your nose up. Should you come in with too high of an angle of attack, the red chevron will light up and tell you nose down.

Instantaneous Angle of Attack indication.
Additional indication segments.
Three point calibration process, programmed on remote switch panel, to aircraft specific lift curve.
16 different LED brightness levels from ultra dim to very bright.
Display has an imbedded photocell for daytime/nighttime brightness settings, choice of which is programmed at the display.
Audio output, tied to existing audio input on audio panel by others.
4 different audio options to choose from which is programmed by the end user at the remote switch panel.
Audio mute switch with amber LED indicator located on remote switch panel.
12-28 VDC input draws less than 0.250 Amps at full brightness.

ABOVE DASH HUD FEATURES
The HUD is a self contained adjustable beam splitter adapter that mounts to the lip of the Eagle display and turns the Alpha System AOA into a true HUD. Intended for placement directly within the pilot's peripheral vision. Allows for instantaneous viewing of AOA information exactly where needed. The HUD glass is an enhanced color correcting, anti-glare lens. Comes complete with mounting frame, base adaptor plate, dome, display brackets and hardware.

Frame Dimensions: L: 4 1/8", W: 1.250"
Base Adaptor Plate: L: 4.613", W: 2.780"
Dome: L: 4.251", W: 2.407", H: .960"

ABOVE DASH HUD COMPONENTS
Mounting Frame.
Base Adaptor Plate.
Dome.
Tinted Lens.
Custom Display Brackets.
Hardware.
HUD Cover with Flag.

KIT COMPONENTS
Eagle Display
Switch Panel Module
I/F Module
Non Heated Standard Probe
9x9 Probe Mounting Plate
Above Dash HUD (Heads Up Display Adapter)
HUD Cover
6ft Power Cable
6ft Display Extension Cable
6ft AUX Cable
6ft Switch Panel Extension Cable
25 ft Blue Pneumatic Hose
25 ft White Pneumatic Hose
Eagle Installation Manual
Eagle Operations Manual
Protractor
Probe Cover
Screwdriver

ADAPTER KITS / ADD ONS
I/O Module Enhancement (Flaps)
Heated Probes12V / 24V

TECHNICAL SPECIFICATIONS
Complete Kit Weight    Less than 3.00 lbs. Click here for full list.
AOA Interface Module size    In Inches: 5.75 x 2.60 x 1.65
System Voltage Requirements    12 - 28 Volts DC
System Max Power Draw    0.250 Amps
System Power Cable    6 ft, three wires: power, ground and shield
Above Dash HUD Weight    4.32 oz / 0.270 Lbs
HUD Frame Dimensions    L: 4 1/8" x W: 1.250"
HUD Base Adaptor Plate Dimensions    L: 4.613", W: 2.780"
HUD Dome Dimensions    L: 4.251", W: 2.407", H: .960"
Heated Probe Voltage Requirements    12 or 24 VDC (must specify when ordering)
Heated Probe Power Draw    86 Watts at 12VDC / 172 Watts at 24VDC
Heated Probe Current Draw    8 Amps at 12VDC and 8 Amps at 24VDC
Heated Probe Power Wire    Supplied by others
Audio Output    1 Volt P-P max at 300 ohm input impedance
Aux (Audio) Cable    6 ft, three wires: AP audio, AP ground and shield
Audio Options    Four
Mute Switch    Yes, on switch panel
LED Brightness Levels    16, from ultra dim to very bright
Photocell Diode    On display, allows for custom daytime/nighttime brightness settings