Ardrox 2302 - Seal Heavy Duty Paint & Carbon Remover - 25Lt

Chemetall GmbH

Ardrox 2302 - Seal Heavy Duty Paint & Carbon Remover - 25Lt

P/N: 50836490

Product Code: PRM17C

Certificate Type: Certificate of Conformity (CoC)

Hazardous Materials: Non Hazardous

2.161,04 $
Ardrox 2302 is a paint and carbon remover, it is a mixture of solvents, activators and corrosion inhibitors.
In Stock

Fast Delivery

Domestic orders placed today will be delivered the next day or on the first following business day. Delivery to all EU countries via Serbia Post, DHL, FedEx, TNT or UPS.

Original Parts

We guarantee 100% authenticity of all aviation components. All products come directly from authorized manufacturers and distributors, with full documentation and certificates.

Expert Support

Our team of certified technicians is available for all your inquiries. Contact us by phone, email or live chat. Working hours: Mon-Fri, 08:00-18:00.

P/N 50836490
Delivery Usually within 7-8 weeks after placing order
Applications Paint remover
Product Code PRM17C
Product Category Paint & Removers
Certificate Type Certificate of Conformity (CoC)
Country of Manufacture France
Hazardous Non Hazardous
Alternate P/N A23020025L
Importer for Serbia Grappolo Aviation Supply Co. Ltd
Manufacturer Chemetall GmbH

Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors. It consists of two layers: an upper layer oil seal to prevent evaporation of the active paint removing solvents in the lower layer.Ardrox 2302 contains no phenolic compounds, aromatic solvents or heavy metals.

Ardrox 2302 will remove a wide range of paint schemes including baked acrylics, epoxies,polyurethanes, and phenolics. It will also remove carbon or carbonaceous deposits, polymerized gum and lacquer deposits.

Application:
Ardrox 2302 is used as supplied. The total content of the container must be emptied into the tank. The recommended operating temperature range is 80 - 110°C (176 - 230°F). The product may be used for short periods at higher temperatures up to a maximum of 140°C (284°F) for removal of more obdurate finishes. In all cases, ensure, that the seal is properly maintained and all local regulations complied with, considering the 108°C (228°F) flash point of the lower layer.

 

Immersion - Immerse dry components to be stripped in Ardrox 2302 in the lower layer until paint or carbon deposits have become fully softened or detached.
Drain - drain components (over Ardrox 2302 tank) for approximately one minute.
Immersion - Immerse components in an Ardrox primary cleaner at 10% by volume at room to reduce vapors and aid subsequent pressure rinsing.
Pressure rinse - Pressure rinse components. The use of an Air/Water Gun or high pressure water rig is recommended.
Dry - Dry components thoroughly using compressed air (or an air recirculation oven at 40- 80°C / 140 - 176°F).


Approvals:
CFMI - CFM56
GE Aviation - SPM 70-80-04
IAE - V2500
Pratt Whitney - SPM 70-12-00
Rolls Royce - CSS 235 OMat 1/226
SNECMA - DMR 70-129

Conformances:
USAF - MIL-PRF-83936C
Messier/Bugatti/Dowty - PCS 2700°F
ASTM = ASTM F-519
Physical Chemical Properties:
Appearance - pale straw-colored, diphase liquid
Density (typical) g/ml 1.05 to 1.07 @ 20°C (68°F)
Flash Point (upper layer) °C (°F) 190 (374) Cleveland Open Cup
Flash Point (lower layer) °C (°F) 108 (228) Cleveland Open Cup

No reviews yet

Be the first to review this product and help others make their choice.

Login Required

You must be logged in to download technical documentation.