ARDROX 2526 is a non-flammable application type paint remover, designed to remove the more resistant types of polyurethane and epoxy surface coatings. The product contains chlorinated solvents and phenolic materials.

ARDROX 2526 readily removes air-cured polyurethane and epoxy paint schemes from aircraft skins, road transport vehicles and other painted surfaces. It is readily rinsed off with water, leaving a clean surface.

ARDROX 2526 is particularly economical for the removal of paint from large surfaces when the material is sprayed onto the surface. ARDROX 2526 is not suitable for removing paint from plastic materials, including glass fibre and carbon fibre reinforced laminates.

Features
Readily removes air- cured polyurethane and epoxy paint schemes from aircraft skins, road transport vehicles and other painted surfaces.
It is readily rinsed off with water, leaving a clean surface.
Is particularly economical for the removal of paint from large surfaces when the material is sprayed onto the surface.
Is not suitable for removing paint from plastic materials including glass fibre and carbon fibre reinforced laminates

Method of use:
ARDROX 2526 is best applied by spray. It may also be applied by brush as a thick, even layer, care being taken not to leave any dry or thinly covered areas. The remover should remain in contact until the film is blistered over the whole surface. The bulk of the loosened paint can be removed with a wooden scraper, followed by rinsing with a jet of water. Alternatively, the whole may be removed in one operation using an ARDROX high pressure wash rig.

For advice concerning application equipment contact your local Chemetall Aerospace Technologies Representative.

N.B. ARDROX 2526 must not be used in pressurised containers manufactured from, or containing, aluminium or zinc components.

Technical Information:
Appearance: Reddish brown, viscous liquid.
Density: 1.24 g/ml at 20°C.
Flash Point: None.
Viscosity: 25 - 45 poise (Brookfield Viscometer)